Testing The Telephone; Testing The Telephone Functions; Checking The Key Assignments - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
* 940=Phone test?
qmhd
Program/Service
>
* 91=Prog. feature key?
>
Program another key?
>
End?

Testing the Telephone

Testing the Telephone Functions

You can test your telephone functions.
Precondition: Your telephone is idle.
Press the key. The LED lights up.
:
Select and confirm.
or
Enter the code.
If everything is OK,
• all LEDs on the telephone start flashing, including
the ones on the key module (only the Program/Ser-
vice menu LED lights up);
• your station number appears on the screen;
• all pixels in the display are activated;
• the ringer signal sounds.

Checking the Key Assignments

You can check the assignment of keys on your tele-
phone to see which functions are programmed on
which keys.
Press the key. The LED lights up.
:
Select and confirm.
or
qme
Enter the code.
Press the key. The key assignment appears on the
screen.
:
Select and confirm.
or
:
Select and confirm.
Testing the Telephone
75