Assigning A Procedure (Operating Steps) To A Key - Siemens HiPath 500 Operating Instructions Manual

Saving Station Numbers, Functions, Procedures and Appointments
Step by Step
Program/Service
>
* 91=Prog. feature key?
Change feature?
>
Procedure key?
Redial
US: Save entry?
UK: Save?
>
Previous?
End?
>
Program another key?
72
Assigning a Procedure (Operating
Steps) to a Key
Station numbers and functions which require additional
inputs, i.e. comprise several operating steps, can be
saved to a single key on your telephone.
Using the associated dial function, for example
page 39, you can save all the remaining inputs re-
quired (station number of the calling party + the station
number to be dialed) to a single key.
Station numbers which require additional inputs but
also dial pauses can also be stored.
Press the key. The LED lights up.
:
Select and confirm.
or
qme
Enter the code.
Press the key. If the relevant key is already pro-
grammed, the programmed function appears on the
screen.
:
Confirm.
:
Confirm.
o
Enter the procedure, for example, "*67 231
089123456".
*67= code for associated dial
231= station number of the calling party
089123456 = number to be dialed.
if necessary
To insert pauses, press this key (a "P" is displayed).
:
Confirm.
:
or If you make a mistake:
:
Select and confirm. This deletes all digits entered.
:
Confirm.
or
:
Select and confirm.