Using Other Team Functions; Turning Group Call On And Off - Siemens HiPath 500 Operating Instructions Manual

Using Other Team Functions

Step by Step
106
Using Other Team Functions

Turning Group Call On and Off

If this function has been configured (contact your ser-
vice personnel), you belong to one or more user groups
that can all be reached at a hunt group or group station
number.
Incoming calls are signaled on all group member tele-
phones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
You can also belong to a team (including executive/sec-
mretary ones) in which station numbers are pro-
grammed on trunk keys
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
If the LED on a programmed "US: Hunt group join/leave
UK: Hunt group join/leave" key is illuminated
page 69, this means that the audible tone was acti-
vated for at least one group.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) page 112!
page 99.