Dialing From The Internal Directory - Siemens HiPath 500 Operating Instructions Manual

Making Calls to Stored Destinations
Step by Step
Speaker
Phonebook?
1=internal?
If applicable
If applicable
50

Dialing from the Internal Directory

If this function has been configured (ask the service per-
sonnel), all internal station numbers and central speed-
dial numbers for which a name was assigned are stored
in your internal directory.
Precondition: Names have been assigned to the sta-
tion numbers stored in the system.
n
Lift the handset.
or
Press the key. The LED lights up.
:
Confirm.
or
qih
Enter the code.
If applicable If several directories have been configured (not in Hi-
Path 500):
:
Confirm.
Enter the name (or just the initial letters) of the party
a
you want to call. Entries are not case-sensitive. The first
entry that matches your input is displayed.
You will hear a short beep if there is no matching entry
for the letters entered.
Back-
Press the key to delete the letters to the left of the cur-
space
sor one by one. The first entry in the directory reappears
once you have deleted all letters.
Scroll to move to the next or previous entry.
Confirm the required entry.
Enter
The station number is dialed.
The following operation is indicated by external
keyboard inputs. For a description of further op-
tions, see page 213.
For more information on using an external key-
board, see page 207.