Using Repertory Dialing Keys; Using Station And System Speed-Dial Numbers - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
*
7=Use speed dialing?
If applicable

Using Repertory Dialing Keys

Precondition: You have saved a station number on a
repertory dialing key
Press the key on which the number is saved.
If the station number is located on the second level, first
press "Shift".
You can also press the repertory dial key during a
call. This automatically sets up a consultation
page 40.
Using Station and System Speed-Dial
Numbers
Precondition: You have stored station speed-dial num-
bers page 68 or the service personnel has stored
system speed-dial numbers.
Press the key. The LED lights up.
:
1
Confirm .
or
qk
Enter the code.
o
Enter a speed-dial number.
" 0" to "
* *
"000" to "999" = system speed-dialing (contact your ser-
vice personnel).
Suffix-dialing
o
If necessary, you can suffix-dial additional digits
(for example, the user's extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
[1] "Different Displays in a HiPath 4000 Environment (Not in
HiPath 500)"
Making Calls to Stored Destinations
page 66.
9" = station speed-dialing.
page 118
55