Call Waiting (Camp-On) - Siemens HiPath 500 Operating Instructions Manual

If You Cannot Reach a Destination ...
Step by Step
Delete?
>
End?
Program/Service
Speaker
Camp-on
60
Deleting a displayed entry:
:
Confirm.
Ending callback display:
:
Select and confirm.
or
Press the key. The LED goes out.
or
Press the key. The LED goes out.

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the
display and the busy tone is followed by the ring tone.
The called party can then respond
The called party can prevent automatic call wait-
ing
If this feature is configured (contact your service
personnel), you will hear the ring tone and the
message "Camp-on" is immediately displayed.
page 23.
page 23