Suppressing The Number Display At The Called Party; Entering Commands With Tone Dialling (Dtmf Suffix Dialling) - Siemens optiPoint 500 entry Operating Instructions Manual

Setting up calls
Step by Step
S peaker
F;=
or
or
Ente r th e code !
G;=
or
or
Ente r th e code !
14 14 14 14
The called party is busy or does not answer:
Press the key. The lamp goes out.
Suppressing the number display at the
called party
Suppression of the number indication only applies to
the next call and is not stored together with the redial
function.
To activate:
F>9
UK code or Stand ard code/Euro code.
Enter the code which has b een programmed for you.
Enter the other party's number. If the call is answered,
E
your number does not appear on the called party's dis-
p lay (if the telephone has a display).
To deactivate:
G>9
UK code or Stand ard code/Euro code.
Enter the code which has b een programmed for you.
Entering commands with tone dialling
(DTMF suffix dialling)
After dialling a number, you can set tone dialling in order
to activate equipment - such as an answering machine
or an automatic information or switching system - by
means of command inputs in DTMF mode
(DTMF = dual-tone multifrequency d ialling).
FG
Switch over to tone signaling.
This feature is not applicable for UK and other
countries using tone dialling (default).