Attaching The Belt - Husqvarna Rider ProFlex 21 II Operator's Manual

Attaching the Belt

1. Place the forward part of the belt in place
and hang the forward part around the
handle of the safety catch.
2. Put the belt on the middle pulley and
against the anti-scalp rollers.
3. Press the guide plate down under the
anti-scalp rollers and push the belt into
place.
4. Hook the spring to the blade brake.
Attaching the belt to the forward pulley is
described in points 6-7 under Attaching the
Cutting Unit, see page 37.
MAINTENANCE
8009-009
8009-343
8009-005
45
English-