Mechanical Lifting Lever For The Cutting Unit - Husqvarna Rider ProFlex 21 II Operator's Manual

Mechanical Lifting Lever for the Cutting Unit

The lever is used as a backup lever to put the
cutting unit in either the transport or mowing
position when hydraulic pressure is
unavailable. It can also be used to
mechanically secure the cutting unit in the
transport position.
The lever must be used when starting the
engine, if the engine stopped with the unit in
the mowing position, in order to raise the unit
so that the start lock circuit is disengaged.
In the transport position, the blade brake is
automatically activated so that the blades
stop within about five seconds.
Transport Position
Pull the lever backwards to the locked
position to engage the transport position.
The unit is raised and the blades stop
rotating.
Mowing Position
Depress the lock button and move the lever
forwards to engage the mowing position.
The unit is lowered and the blades begin to
rotate.
16
English-
PRESENTATION
Raising the cutting unit with the mechanical
lifting lever
Lowering the unit with the mechanical lifting lever
8009-322
8009-324