Differential Lock - Husqvarna Rider ProFlex 21 II Operator's Manual

3. Select the required cutting height (1-7)
using the cutting height lever.
4. Depress the lock button on the
mechanical lifting lever and move the
lever to its most forward position. The
cutting unit is lowered and started if the
lift hydraulics are in the lower position.
5. If the cutting unit does not lower
completely, or if the blades do not rotate,
lower the cutting unit completely using
the hydraulic lifting lever.
In order to ensure that the hydraulic
cylinder is in the outer position, hold the
lever in the forward position for a half to
one second.

Differential Lock

The differential lock can be used during
operation via the pedal on the left side.
In order not to get stuck, one can engage it
shortly before the obstacle.
1. Engage the differential lock when
necessary by pressing the pedal. If a
wheel spins, let the drive pedal up a little.
2. Ensure that the differential lock is
disengaged when the pedal is released.
Use small steering movements or
reverse a little until the pedal returns to
its normal position.
DRIVING
8009-327
8009-324
8009-325
6020-009
21
English-