Husqvarna Rider ProFlex 21 II Operator's Manual page 40

4. Push the unit in so that the interior plugs
(B) touch the bottom of the equipment
frame's grooves.
5. Hook in the height adjustment handle's
(E) rear fastener:
Move the cutting height lever to the
forward position. Loosen the stay by
pulling the frame's forward section up or
down.
!
WARNING!
Watch your fingers. Do not turn the
blades or the belt.
6. Loosen the belt tension spring and attach
the belt to the front belt pulley. A new belt
is short. Turn the forward pulley as
needed with a spanner on the central bolt.
7. Re-attach the belt tension spring.
IMPORTANT INFORMATION
Check that the belt is around the idler.
Belt Sketch
• 1. Drive belt
• 2. Forward pulley
• 3. Belt idler
• 4. Belt tension spring
8. Attach the nose cover.
38
English-
MAINTENANCE
1
E
3
2
8009-018
8009-168
8009-008
4
6016-105