Stopping The Engine - Husqvarna Rider ProFlex 21 II Operator's Manual

Stopping the Engine

If the engine has been worked hard, it is
preferable to let the engine idle for a minute
so it is running at its normal working
temperature when it is stopped. Avoid idling
the engine for long periods, as there is a risk
of carbon build-up on the spark plugs.
1. Lift the cutting unit with the hydraulic
lifting lever. The unit can then be secured
in the raised position if necessary by
moving the mechanical lifting lever
backwards to the lock position.
If the cutting unit is left in the lower
position, the start lock circuit will prevent
engine starts.
2. Move the throttle control to the MIN
position. Turn the ignition key to STOP.
3. When the Rider is at a standstill, press
down the parking brake and push in the
locking button completely.
DRIVING
8009-323
8009-322
8009-378
8009-328
23
English-