Starting The Engine - Kipor Sinamaster I G2600 Operation Manual

3.SPARK PLUG SERVICE
RECOMMENTED SPARK PLUG: WR7DC
To ensure proper engine operation, the spark plug must be properly gapped and
free of deposits.
1.Remove the spark plug maintenance cover.
2.Remove the spark plug cap.
3.Clean any dirt from around the spark plug base.
4.Use the wrench to remove the spark plug.
Spark Plug Cap
Spark Plug Maintenance Cover
Handle Bar
Plug Wrench

5.STARTING THE ENGINE

NOTE
Before starting the engine, disconnect the load from the DC terminals.
When starting the generator after adding fuel for the first time or after long term
storage, or after running out of fuel, turn the fuel valve lever to the ''ON''
position, then wait for 10 to 20 seconds before starting the engine.
1.Turn the fuel cap lever fully clockwise to the ON position.
NOTE
Turn the fuel cap vent lever to the OFF position when transporting generator.
Fuel Cap Lever
2.Turn the engine switch to the ON position.
Engine Switch
ON
ON
OFF
ON