NOTIS Editing
Select Length
Code 128
GS1-128 (UCC/EAN-128)
Replace Field
Separator
ISBT 128
Industrial 25 (Discrete 25)
Select Length
Interleaved 25
Convert to EAN-13
Verify Check Digit
Transmit Check Digit
Select Length
Chinese 25
Code 39
Convert to Code 32
Code 32 Prefix
Verify Check Digit
Transmit Check Digit
Decide whether to include the start/stop characters in the
data being transmitted.
NOTIS Editing is to strip the start/stop characters, i.e.
to disable "Transmit Start/Stop Characters".
Any length
One or two fixed lengths
Range (1~55)
Decide whether to replace the field separator.
Any length
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
Decide whether to include the check digit in the data being
transmitted.
Any length
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
"Verify Check Digit" must be enabled.
Appendix III
Laser (SE955)
No
4~55
Enable
Enable
No
Enable
Enable
4~55
Enable
No
No
No
4~55
Disable
Enable
No
No
No
No
87