Table of Contents
Advertisement
FORGE 9 Series Application Generator
Transmit Check Digit
Select Length
Plessey
Convert to UK Plessey
Transmit Check Digit
Telepen
Original Telepen
(Numeric)
AIM Telepen (Full
ASCII)
GS1 DataBar Omnidirectional (GS1 DataBar-14, RSS-14)
Transmit Code ID
Transmit Application
ID
Transmit Check Digit
GS1 DataBar Limited (RSS Limited)
Transmit Code ID
Transmit Application
ID
Transmit Check Digit
GS1 DataBar Expanded (RSS Expanded)
Transmit Code ID
EAN-8
Convert to EAN-13
Transmit Check Digit
Addon 2 / Addon 5
EAN-13 / UPC-A
ISBN Conversion
ISSN Conversion
82
User Guide
Decide whether to include the check digit in the data being
transmitted.
Last digit not transmitted
Both digits transmitted
Both digits not transmitted
One or two fixed lengths
Range (1~127)
When applied, each occurrence of the character "A" in the
barcode data will be replaced by the character "X".
Decide whether to include the two check digits in the data
being transmitted.
The original Telepen includes numeric characters.
AIM Telepen (Full ASCII) includes all the alphanumeric and
special characters.
Decide whether to include Code ID ("]e0") will be included
in the data being transmitted.
Decide whether to include the Application ID ("01") in the
data being transmitted.
Decide whether to include the check digit in the data being
transmitted.
Refer to RSS-14.
Refer to RSS-14.
Refer to RSS-14.
Refer to RSS-14.
The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
Decide whether to include the check digit in the data being
transmitted.
Decide whether to decode EAN-8 with supplementals.
The EAN-13 barcode starting with 978 and 979 will be
converted to ISBN.
The EAN-13 barcode starting with 977 will be converted to
ISSN.
Both digits
transmitted
4~127
Disable
No
Yes
Disable
Yes
No
Disable
Yes
Yes
Yes
Disable
Yes
Yes
Yes
Disable
Yes
Enable
No
Yes
No
Enable
No
No
Advertisement
Table of Contents
