CipherLab 9300 Series User Manual page 112

FORGE 9 Series Application Generator
Bits per Pixel
Default Image Store
Auto Image File Name
File Title
Using default naming
rule
Note: (1) For JPEG files, these BPP settings are ignored for it always uses 8 bits per pixel!
(2) When the image capture feature is enabled, press the [SCAN] key on the
mobile computer, and it will capture an image instead of reading a barcode.
104
User Guide
Select the number of significant bits per pixel (BPP) to use
when capturing an image.
1 BPP (for black and white images)
4 BPP (to assign 1 of 16 levels of grey to each pixel)
8 BPP (to assign 1 of 256 levels of grey to each pixel)
By default, the captured image is stored under the
directory "\DiskOnChip".
When enabled, the image file captured by 2D scan engine
will be saved to a filename following the automatic naming
rule explained below.
Specify a string prefixed to the filename. It allows up to 5
characters.
When enabled, the format of automatic filename is
xxxxxyaabbccccc.jpg (or .bmp), where
"xxxxx" is the file title specified above.
"y" can be the capital letter F for Form, or L for
Lookup.
"aa" indicates in which Form (or Lookup) the image
data is saved.
"bb" indicates in which "Field" of Form (or Lookup) the
image data is for.
"ccccc" stands for a 5-digit serial number starting from
"00001".
When disabled, the format of automatic filename is
xxxxxccccc.jpg (or .bmp), where
"xxxxx" is the file title specified above.
"ccccc" stands for a 5-digit serial number starting from
"00001".
8
\DiskOnChip
Disable
None
Disabled