Table of Contents
Advertisement
FORGE 9 Series Application Generator
Note: Inter-Character Gap is supported on 2D scan engine for 9600/9300.
Code 128
GS1-128 (UCC/EAN-128)
Replace Field
Separator
ISBT 128
Industrial 25 (Discrete 25)
Select Length
Interleaved 25
Convert to EAN-13
Verify Check Digit
Transmit Check Digit
Select Length
Code 39
Convert to Code 32
Code 32 Prefix
Verify Check Digit
Transmit Check Digit
Code 39 Full ASCII
92
User Guide
If this problem occurs, set it to "Large Intercharacter
Gaps" to tolerate these out-of-specification barcodes.
Normal intercharacter gaps
Large intercharacter gaps
Decide whether to replace the field separator.
Any length
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
Decide whether to include the check digit in the data being
transmitted.
Any length
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
"Verify Check Digit" must be enabled.
Code 39 Full ASCII includes all the alphanumeric and
special characters.
Enable
Enable
No
Enable
Enable
4~55
Enable
No
No
No
4~55
Enable
No
No
No
No
Disable
Advertisement
Table of Contents
