Introduction
Warning:
(1) On the Barcode tab of the AG program, you must select the correct
barcode reader even though no modification is made to its settings.
Otherwise, a warning dialog box is displayed to remind you of "wrong
reader type" after opening the template file on the mobile computer. Then,
you may choose to close the application directly or use the default setting
to initialize the barcode reader.
(2) AG9400 or AG9600 program allows the configuration of camera
settings on the Settings tab, as well as the Image Capture setting on the
Barcode tab when the barcode reader selected is 2D reader. If 9400/9600
mobile computer is equipped with both a camera and 2D reader, it only
allows using the camera for image capture.
9