CipherLab 9300 Series User Manual page 102

FORGE 9 Series Application Generator
GS1 DataBar Expanded
(RSS Expanded)
Covnert GS1 Databar
to UPC/EAN
Note: (1) GS1 DataBar (RSS) are all disabled for LR/ELR Laser scan engine.
(2) GS1 DataBar (RSS) are all enabled for 2D scan engine.
EAN-8
Convert to EAN-13
Addon 2 / Addon 5
EAN-13
Bookland EAN (ISBN)
Addon 2 / Addon 5
UPC-A
Transmit Check Digit
Transmit Preamble
Addon 2 / Addon 5
UPC-E0
Transmit Check Digit
Transmit Preamble
Addon 2 / Addon 5
Convert to UPC-A
UPC-E1
Transmit Check Digit
Transmit Preamble
Addon 2 / Addon 5
94
User Guide
Convert to EAN-13
Strip the leading "010" from barcodes.
"01" is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading "0100" from barcodes.
"01" is the Application ID and must be followed by
two or more zeros (but not six zeros)
The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
Refer to UPC/EAN Addon setting.
The EAN-13 barcode starting with 978 will be converted to
ISBN.
Refer to UPC/EAN Addon setting.
Decide whether to include the UPC-A check digit in the
data being transmitted.
Decide whether to include the UPC-A preamble System
Number (and Country Code) in the data being transmitted.
Refer to UPC/EAN Addon setting.
Decide whether to include the UPC-E0 check digit in the
data being transmitted.
Decide whether to include the UPC-E0 preamble System
Number (and Country Code) in the data being transmitted.
Refer to UPC/EAN Addon setting.
The UPC-E0 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
Decide whether to include the UPC-E1 check digit in the
data being transmitted.
Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.
Refer to UPC/EAN Addon setting.
See below.
No
Enable
No
Enable
Yes
Enable
Yes
System
Number
Enable
Yes
System
Number
No
Disable
Yes
System
Number