Table of Contents
Advertisement
SYMBOLOGY SETTINGS TABLE
The symbology settings for the LR/ELR scan engine are all supported on the 2D scan
engine. In addition, the 2D scan engine supports the following symbology settings:
2D
Matrix 25
Redundancy
Verify Check Digit
Transmit Check Digit
Select Length
Chinese 25
Note: Matrix 25 and Chinese 25 are supported on 2D scan engine for 9300/9600.
Code 11
Verify Check Digit
Transmit Check Digit
Select Length
Postal Codes
US Postnet
US Planet
Transmit US Postal
Check Digit
UK Postal
Transmit UK Postal
Check Digit
Japan Postal
Description
Decide whether to enable read redundancy.
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
"Verify Check Digit" must be enabled so that the check
digit can be left out (= "Transmit Check Digit"
disabled).
Any length
One or two fixed lengths
Range (1~55)
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No verification
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
"Verify Check Digit" must be enabled.
Any length
One or two fixed lengths
Range (1~55)
US Postnet or US Planet must be enabled first!
UK Postal must be enabled first!
Appendix V
2D Imager
Default
Enable
Disable
No
No
4~55
Enable
Enable
No
No
4~55
---
Enable
Enable
Enable
Enable
Enable
Enable
99
Advertisement
Table of Contents
