2D IMAGER
The tables below list reader settings as well as symbology settings for the 2D scan
engine.
READER SETTINGS TABLE
2D
Focus Mode
Note: Focus mode is supported on 2D scan engine for 9400/9500CE.
Decode Illumination
Aiming Pattern
Decode Time-out
Redundancy Level
Level 1
Level 2
Level 3
Description
Select the focus mode to control the working range:
Far Focus – optimized to read at its far position
Near Focus – optimized to read at its near position
Smart Focus – toggles the focus position after every
frame
Decide whether to flash illumination on every barcode
capture to aid decoding.
Turn On (Internal LED )
Turn Off
Decide whether to project the aiming pattern during
barcode capture.
Turn On
Turn Off
Set the maximum time for decoding to continue during a
scan attempt.
5~99, in units of 0.1 second.
The following barcodes must be successfully read twice before being
decoded:
Barcode Types
Codabar
MSI
Industrial 25 (Discrete 25)
Interleaved 25
All barcodes must be successfully read twice before being decoded.
All barcodes except for the following barcodes must be successfully read
twice before being decoded.
The following barcodes must be read three times:
Appendix V
Code Length
8 characters or less
4 characters or less
8 characters or less
8 characters or less
Default
Far Focus
On
On
3.0 sec.
Level 1
97