Sam4s ER-260 Operation And Programming Manual page 73

Programming PLU Status
1. Turn the control lock to the PGM position.
2. Enter the number of the PLU you wish to program (1-1000), press the PLU key.
3. Decide if you want a negative, enforced non-add entry, or disabled PLU. If you do not
want any of these options, enter 0. If you wish to select any of these options, complete
the table below by adding the status digits for each option. Enter the resulting digit.
PLU is Negative
Enforce Non-Add Entry
PLU is Disabled
4. Decide if you want a preset or single item PLU. If you do not want any of these options,
enter 0. If you wish to select any of these options, complete the table below by adding
the status digits for each option. Enter the resulting digit.
PLU is Preset
PL:U is Single Item
5. Select tax status by choicing a status from tax.tatus table below.
No Tax
Taxable by GST
Taxable by Rate 2
Taxable by Rate 3
Taxable by Rate 4
6. For the use the KP.
Send KP?
7. Press the department key that you want this PLUs' sales added to.
8. Repeat steps 2 to 7 for each PLU you wish to program.
9. Press the CASH/TEND key to end programming.
ER-260/265 Electronic Cash Register AU
Yes = 1
+
No = 0
Yes = 2
+
No = 0
Yes = 4
+
No = 0
=
Yes = 1
+
No = 0
Yes = 2
+
No = 0
=
0
1
2
3
4
Yes = 1
+
No = 0
=
0
0
0
0
1
0
1
0
0
Program Mode Programming • 65