Installing The Dashboard Driver Using The Usb Connection Using Xp Or Vista; Installing The Dashboard Driver Using The Usb Connection Using Windows 7 Or 8 - Epilog Fusion13000 Owner's Manual

Section 5: Installing the Epilog Dashboard
Installing the Dashboard Driver
Using the USB Connection using XP
or Vista
To install the Dashboard print driver using the USB connections with Windows
XP or Vista, follow these instructions:
1. Connect your laser system to your computer using the USB cable that came
with your machine.
2. Power up your Fusion system.
3. Insert the Epilog driver disk into your computer's hard drive.
4. Your computer will prompt you to install the driver.
5. Follow the prompts.
Installing the Dashboard Driver
Using the USB Connection using
Windows 7 or 8
The process of installing a USB printer when using Windows 7 or 8 is more
complicated than when using XP or Vista. Windows 7 and 8 will not
automatically walk you through the installation process so it is important to
follow the instructions below.
Please follow these instructions closely! Using a
different process to install the Dashboard driver
using a different process is likely to fail if you
are using Windows 7 or 8.
Print Driver
23