Epilog Fusion13000 Owner's Manual page 33

Section 3: Getting Started
4) ECC (Epilog Control Center)
The ECC is the software program that provides job management capabilities to
keep track of print jobs, laser settings and other job management tasks after the
job has been sent to the laser from the Dashboard driver.
The ECC is not required in order to operate your Fusion laser, but is a very
useful job management tool that users find quite valuable.
It is useful to install the ECC prior to installing the print driver.
The ECC ONLY works through the USB
connection. The ECC cannot be accessed
through the Ethernet connection.
3