Epilog Fusion13000 Owner's Manual page 197

Section 16: Specifications
Processor Speed
A faster processor will allow you to do more tasks in less time. While it's not
necessary to purchase the fastest processor available, you'll want adequate speed to
operate your graphics program. Processor speeds are always improving, but
processor speeds of about 2.0 GHz or faster are a good place to start.
10/100 Network Interface Card (NIC)
All new computers have a 10/100 network connection as standard equipment. As
well as allowing multiple computers to be linked together in a network, this
technology also allows direct printing from the computer to the laser. Epilog supplies
a network Crossover cable with each laser system that allows one computer to print to
a single Epilog laser system.
Hard Drive
This is the permanent memory in your computer. Many users feel that you can never
have a large enough hard drive. Luckily, most computer manufacturers put high
capacity drives in new computers these days. When in doubt, buy bigger than you
think you might need. It's so in-expensive that it's worth the peace of mind to have it
available.
Software
Many users use Corel as their graphics software. Many other Windows software
applications can also be used, although all software is different and may not be
predictable, user friendly or functional. Additionally, the technical support staff at
Epilog may be less familiar with software other than Corel and less able to help with
questions. Consult with your Epilog distributor on software compatibility issues.
Epilog does not guarantee compatibility with any software.
Photolaser Plus is a third party software for converting photos to laser compatible
format. This is an indispensable option for engraving photos.
167