Oce VarioPrint 2090 Configuration And Maintenance Manual page 77

Illustration
[33] Change the Subnet mask
[33] Change the Subnet mask
How to change the Subnet mask
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
1
Click 'Network protocols'.
2
Click 'TCP/IP protocol'.
3
Select 'Subnet mask'.
4
Enter the Subnet mask to match the IP address.
5
Click the 'OK' button to apply the changes.
6
(see 'Test the network connection' on page 83) to test the IP settings.
Note:
Printer configuration 73