Oce VarioPrint 2090 Configuration And Maintenance Manual page 14

Illustration
[1] Logon screen Océ VarioPrint 2090 Settings Editor
[1] Logon screen Océ VarioPrint 2090 Settings Editor
How to access the Océ VarioPrint 2090 Settings Editor in key operator mode
Start your web browser (e.g. Internet Explorer).
1
Enter the URL to connect to the Océ VarioPrint 2090 Settings Editor in the key
2
operator mode, URL = http://<hostname>/kos (The host name describes the
Océ VarioPrint 2090 name on the TCP/IP network).
You now see the logon page of the Océ VarioPrint 2090 Settings Editor. (see
figure)
A URL (Uniform Resource Locator) is the address of a file (resource)
Note:
accessible on the Internet. The type of resource depends on the Internet
application protocol. The URL contains the name of the protocol required to
access the resource, a domain name that identifies a specific computer on the
Internet, and a hierarchical description of a file location on the computer.
Select the key operator mode to enter.
3
Enter the special PIN code.
4
If you enter an incorrect PIN code, an encrypted code appears on the
Note:
logon screen. If you do not remember your PIN code, call the Help desk. The
encrypted code enables the Help desk to return your PIN code.
Press 'Enter' or click'Send' .
5
You can view the settings for the system administrator when you logged
Note:
on as key operator. Select 'View settings for SA' to activate the view mode for
SA settings (you can not change settings).
10 Océ VarioPrint 2090 Configuration and maintenance manual