Oce VarioPrint 2090 Configuration And Maintenance Manual page 74

Illustration
[30] Enable DHCP
[30] Enable DHCP
How to enable DHCP for automatic detection of the IP settings
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
1
Click 'Network protocols'.
2
Click 'TCP/IP protocol'.
3
Select 'DHCP'.
4
Select 'Enable' to apply the DHCP protocol or 'Disable' to do the IP settings
5
manually.
Click the 'OK' button to apply the changes.
6
For the host name standards, see the table in this paragraph.
Note:
70 Océ VarioPrint 2090 Configuration and maintenance manual