Table of Contents
Advertisement
How to add the staples
Push against the upper part of the stapler cartridge.
1
In the same movement, lift the lower part of the stapler cartridge and pull the
2
stapler cartridge toward you.
Remove the stapler cartridge from the stapler.
3
Remove the loose staples if necessary.
4
Make sure not to drop any staples in the finisher.
Note:
Take a new cartridge, type S3.
5
Remove the packing material.
6
Slide the stapler cartridge into the stapler.
7
Press until the stapler cartridge clicks into place.
8
If the new stapler cartridge does not fit, put back the old stapler cartridge
Note:
and call service.
Close the top cover of the finisher.
9
Close the front door of the finisher.
10
System maintenance
125
Advertisement
Table of Contents
