LifeSpan Flare Owner's Manual page 17

6. BODY FAT TESTER
Press "PROGRAM" until the window displays "FAT".
Press "MODE" to select parameters after entering data (F1 = "SEX", F2 = "AGE", F3 = "HEIGHT", F4
= "WEIGHT").
Use "SPEED+/-" to set data. After entering all data the window will display "F5".
Place both hands on the hand sensors for 5 seconds, and the window will display your body fat data.
Input parameter display and setting limits
F-1
F-2
F-3
F-4
FA（BMI）
≤19
20--25
25--29
≥30
7. SLEEP FUNCTION:
The treadmill automatically enters sleep mode after 10 minutes of inactivity. Press any key on the display to
wake the treadmill.
8. SAFETY KEY FUNCTION (if applicable)
Pulling out the safety key during operation will make the treadmill stop immediately. All windows will display
"---" and the machine will beep 3 times. Reconnecting the magnet will allow the treadmill to operate again.
PARAMETERS ARRANGEMENT
SEX 01--02
AGE 10—99 YEARS
HEIGHT 100—200 CM
WEIGHT 20—150 KGS
RESULT
UNDER WEIGHT
AVERAGE
OVER WEIGHT
OBESE
17
NOTE
01= MALE 02= FEMALE
FLARE