Igmp Snooping Group - D-Link DGS-3600 Series User Manual

VID
MAC Address
Port
Type
Next
Clear Dynamic Entry
View All Entry
Clear All Entry

IGMP Snooping Group

IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP
packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field. To view
the IGMP Snooping Group Table window, click IGMP Snooping Group in the Monitoring folder:
The user may search the IGMP Snooping Table by entering the VLAN Name in the top left hand corner and clicking Search.
The following field can be viewed:
Parameter
VLAN Name
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
VLAN, or MAC address.
The VLAN ID of the VLAN the port is a member of.
The MAC address entered into the address table.
The port that the MAC address above corresponds to.
How the Switch discovered the MAC address. The possible entries are Dynamic, Self, and
Static.
Click this button to view the next page of the address table.
Clicking this button will clear Dynamic entries learned by the Switch. This may be
accomplished by VLAN Name or by Port.
Clicking this button will allow the user to view all entries of the address table.
Clicking this button will allow the user to delete all entries of the address table.
Figure 12- 2 . IGMP Snooping Group Table window 8
NOTE: The Switch supports up to 2048 IGMP Snooping
groups.
Description
The VLAN Name of the multicast group.
337