Web Pages - D-Link DGS-3600 Series User Manual

Web Pages

When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a user name
and password to access the Switch's management mode.
Below is a list and description of the main folders and windows available in the web interface:
Administration – Contains windows concerning configuring the basic functions of the Switch, including Device Information, IP
Address, Stacking, Port Configuration, User Accounts, Port Mirroring, System Log, System Severity Settings, SNTP Settings,
MAC Notification Settings, TFTP Services, File System Services, Ping Test, IPv6 Neighbor, DHCP Auto Configuration, SNMP
Manager, IP-MAC-Port Binding, sFlow, and Single IP Management Settings.
Layer 2 Features – Contains windows concerning Layer 2 features of the Switch, including VLAN, Trunking, IGMP Snooping,
MLD Snooping, Spanning Tree, Forwarding & Filtering, and LLDP.
Layer 3 Features – A discussion of Layer 3 features of the Switch, including Interface Settings, MD5 Key Settings, Route
Redistribution Settings, Static/Default Route Settings, Route Preference Settings, Static ARP Settings, Gratuitous ARP Settings,
Policy Route Settings, RIP, OSPF, DCHP/BOOTP Relay, DNS Relay, VRRP, and IP Multicast Routing Protocol.
QoS – Contains windows concerning Bandwidth Control, QoS Scheduling Mechanism, QoS Output Scheduling, 802.1p Default
Priority, and 802.1p User Priority.
ACL – Contains windows for Time Range, Access Profile Table, ACL Flow Meter, and CPU Interface Filtering.
Security – Contains windows for Traffic Control, Port Security, 802.1X, Web Authentication, Trust Host, Access Authentication
Control, Safeguard Engine, Traffic Segmentation, SSL, and SSH.
Monitoring – Contains windows for Device Status, CPU Utilization, Port Utilization, Packets, Errors, Packet Size, Browse
Router Port, Browse MLD Router Port, VLAN Status, VLAN Status Port, Port Access Control, MAC Address Table, IGMP
Snooping Group, MLD Snooping Group, Trace Route, IGMP Snooping Forwarding, MLD Snooping Forwarding, IP Forwarding
Table, Browse Routing Table, Browse IP Multicast Forwarding Table, Browse IP Multicast Interface Table, Browse IGMP Group
Table, DVMRP Monitor, PIM Monitor, OSPF Monitor, Switch Logs, and Browse ARP Table.
Miscellaneous – Contains windows for Reset, Reboot System, Save Services, and Logout.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
NOTICE: Any changes made to the Switch configuration during the current
session must be saved in the Save Changes window (explained below) or
use the command line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.
27