Authentication Server Group - D-Link DGS-3600 Series User Manual

Login Method List
Enable Method List
Click Apply to implement changes made.

Authentication Server Group

This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used to group
TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using method lists. The
user may define the type of server group by protocol or by previously defined server group. The Switch has three built-in
Authentication Server Groups that cannot be removed but can be modified. Up to eight authentications server hosts may be added
to any particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group:
This window displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server Groups
that cannot be removed but can be modified. To modify a particular group, click its hyperlinked Group Name, which will then
display the following window.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Line Interface) application, the Telnet application, SSH and the WEB (HTTP) application.
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists window, in this
section, for more information.
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Enable Method Lists window, in this
section, for more information
Figure 11- 3 . Authentication Server Group window 0
Figure 11- 3 . Add a Server Host to Server Group (radius) window 1
292