Table of Contents
Advertisement
Authentication: select an authentication type to send e-mails.
Off: no authentication is required.
On: authentication is required. You can select [SMTP] or [POP before SMTP].
POP server name: this item is displayed when the [POP before SMTP] option is selected.
The POP server name is used for authorization (64 characters maximum).
User name: type a username to access the mail server (64 characters maximum).
Password: type a password to access the mail server (64 characters maximum).
Recipient e-mail address: type the receiver's e-mail address (64 characters maximum).
You can type up to 3 e-mail addresses separating them by using a semicolon [;].
Administrator e-mail address: type the sender's e-mail address (64 characters
maximum).
Attached file type: select a file type you want to attach to e-mail. The following options are
available:
JPEG: select this option to attach JPEG images.
MPEG-4: select this option to attach MPEG-4 video.
IMPORTANT:
Maximum length of transferred video is about 5 seconds.
IMPORTANT:
To playback recorded video, you may need to install VLC media player. Its official website is
http://www.videolan.org/vlc/
Subject: type the e-mail subject (64 characters maximum) into this box.
IMPORTANT:
The subject may contain only Latin letters.
Message: type the e-mail text in this box (384 characters maximum).
[Test]: click this button to check the file transfer parameters and transfer a test file.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.
7.2.2. Alarm Sending
This section allows you to configure e-mail notification when an alarm is triggered. Select
the option for [On] to enable this option (Pic. 7.8).
N6603 Operations User Manual
.
Chapter 7. SETTING: Advanced
57
Advertisement
Table of Contents
