General - Beward N6603 User Manual

7.1.1. General

This section allows you to configure the FTP client (Pic. 7.3).
Select the option for [On] to enable the FTP client or the option for [Off] to disable it.
IMPORTANT:
When the FTP function is enabled, it may decrease the image quality and number of frames sent by the IP
camera when used in low-bandwidth networks.
FTP server name: type the FTP server IP address or name (64 characters maximum).
User name: type a username to access the FTP server.
Password: type a password to access the FTP server.
Re-type password: re-type the entered password to avoid mistakes in password
assignment.
Passive mode: select the option for [On] to use a passive mode or select the option for
[Off] to use an active mode.
Attached file type: select a file type you want to transfer to the FTP. The following options
are available:
 JPEG: select this option to transfer JPEG images to the FTP.
 MPEG-4: select this option to transfer MPEG-4 video to the FTP.
IMPORTANT:
To playback recorded video, you may need to install VLC media player. Its official website is
N6603 Operations User Manual
Pic. 7.3
Chapter 7. SETTING: Advanced
51