Beward N6603 User Manual page 31

RTP: specify a port range to transfer data between camera and client (clients). The port
number is assigned automatically when connection is established. The port number is assigned
only during stream transmission. You can set the value of the port between the values of 1124 and
65535.
Image rotated: this menu allows the image to be rotated. The following options are
available: «None» - the image is not rotated; «Mirror» - the image is mirrored around the vertical
axis; «Flip» - the image rotated 180°; «Mirror» + «Flip» - the image is mirrored and rotated 180°.
Microphone: this item allows you to enable [On] or disable [Off] a microphone connected
to the camera. G.711 is used as an audio encoding format. By default, the microphone is enabled.
Exposure mode: this item allows you to adjust shutter time to the illumination level.
 50 Hz: select this option if the camera is used indoor where AC-powered illumination
sources at 50 Hz are used.
 60 Hz: select this option if the camera is used indoor where AC-powered illumination
sources at 60 Hz are used.
 Auto: select this option if the camera is used under mixed illumination (sunlight and
indoor illumination) or under bright sunlight. If this option is selected the shutter time is
set to 1/7.5 to 1/120.
IMPORTANT:
When the camera is used under bright sunlight, the image may blink or be too light. To avoid this, select
the option for [Auto].
White balance: the following modes are available: [Auto] – automatic white balance;
[Fluorescent]; [Tungsten]; or [Black&White]. The default option is [Auto]. An important goal of
white balance is to render colors correctly.
 [Auto]: the camera looks at the overall color of the image and calculates the best-fit
white balance. This is a default option for the white balance item and it is recommended
to use it.
 [Fluorescent]: white balance is corrected according to fluorescent lightning.
 [Tungsten]: white balance is corrected according to tungsten lightning.
 [Black&White]: camera switches to black and white mode.
IR LED: allows you to set IR LED mode. [On] means that the IR LED is always turned on.
[Off] means that the IR LED is always turned off. [Auto] means that the IR LED automatically
turns on or off. [Schedule] means that the IR LED turns on or off according to the schedule. Click
the [Schedule] button to specify the schedule or go to SETTING – Advanced – Schedule. See
paragraph 7.6 for detailed information.
N6603 Operations User Manual
Chapter 6. SETTING: Basic
30