Beward N6603 User Manual page 72

Select the option for [On] to enable alarm output or select the option for [Off] to disable it
(Pic. 7.18).
Digital output: allows you to select a voltage level on the camera alarm output:
 High: select this option to increase voltage from 0 to 12 V.
 Low: select this option to decrease voltage from 12 to 0 V.
Trigger condition: select an event that activates the alarm output.
Select the option for [Alarm] to activate the alarm output when an alarm event occurred.
Select the option for [Timer] to activate the alarm output according to the specified schedule. The
duration the alarm output is being active depends on the specified intervals. When the [Timer] is
selected, the [Schedule] button is available, which allows you to specify the intervals.
Alarm: allows you to select an event that activates the alarm output:
Motion detection: the camera activates the alarm output when motion detection is
triggered. To configure this option, click the [Motion detection] button or go to SETTING –
Advanced – Motion detection. See paragraph 7.9 for details.
Use alarm buffer: activates the alarm output when the connection is up after a network
error occurred. To configure the alarm buffer option, click the [Alarm buffer] button or go to
SETTING – Advanced – Alarm buffer. See paragraph 7.8 for details.
Alarm input: activates the alarm output when the alarm input is triggered. To configure this
option, click the [Alarm input] button or go to SETTING – Advanced – Alarm input. See
paragraph 7.7 for details.
Alarm duration: you can specify a period for sending alarm signal to the alarm output
according to the [Digital output] item.
N6603 Operations User Manual
Pic. 7.18
Chapter 7. SETTING: Advanced
71