Table of Contents
Advertisement
IP address: IP address from PPPoE server (assigned by server).
User ID: type a username for PPPoE connection. The maximum length is 64 characters
(assigned by your Internet service provider or PPPoE provider).
Password: type a password for PPPoE connection. The maximum length is 32 (assigned
by your Internet service provider or PPPoE provider).
Re-type password: re-type the entered password to avoid mistakes in password
assignment.
Obtain DNS server address automatically: select this option to obtain a DNS address
automatically.
Use the following DNS server address: select this option to type DNS servers' addresses
manually.
Primary DNS server: type the primary DNS server IP address.
Secondary DNS server: type the secondary DNS server IP address.
IMPORTANT:
You must restart the camera for the changes to take effect. To do so, go to SETTING – General –
System – Initialize.
IMPORTANT:
After a PPPoE connection is established, the IP address you specified in SETTING – General – Network
– Information is unavailable and you need to type the IP address assigned by PPPoE server to access
the camera (SETTING – General – Network – PPPoE).
N6603 Operations User Manual
Pic. 6.22
Chapter 6. SETTING: Basic
41
Advertisement
Table of Contents
