Http Event - Beward N6603 User Manual

 Sequence number: adds a six-digit number. User can click the [Clear] button to reset
the sequence number anytime. When user clicks the [Clear] button it resets the
sequence number and starts it from 000001.
File size: specify the size for the files recorded to network attached storage. The size is
1 or 2 MB. The camera records in avi format.
Cyclic size: specify the disk space on network attached storage to store files recorded by
the camera. The size is from 100 MB to 1 TB. After the specified disk space is full, the oldest files
are overwritten with the new ones.
NOTE:
When the maximum size is reached, it automatically overwrites old files. However, the new files may be
written with a time delay, which corresponds to a total time required for deleting the old files and recording
the new ones.
IMPORTANT:
If the camera has been recording by alarm when the periodical recording starts, the periodical recording
will be stopped and resumed only after alarm triggered recording is completed.
Recording time: allows you to set a period for recording to network attached storage when
an alarm is triggered. The following options are available:
 Always: select this option for continuous recording to network attached storage.
 Schedule: select this option for scheduled recording to network attached storage. To
configure this option, click the [Schedule] button or go to SETTING – Advanced –
Schedule. See paragraph 7.5 for details.
NOTE:
Click [ОК] to save changes. Otherwise, the changes may not be saved.

7.4. HTTP Event

This menu allows you to configure sending of HTTP (CGI) commands to an external alarm
device. This device, in turn, sends a command to another external device or closes relay contacts.
For example, the camera sends an HTTP (CGI) command to the executive device, which, in turn,
closes relay contacts and triggers an alarm. The menu contains two sections: «General» and
«Alarm sending» (Pic. 7.15).
N6603 Operations User Manual
Chapter 7. SETTING: Advanced
67