Mjpeg - Beward N6603 User Manual

Ip camera

Hide thumbs Also See for N6603:

Table of Contents

Image size: allows you to set the following image resolution: 320x240, 160х120. The

default value is 160х120.

Frame rate: allows you to set streaming rate in frames per second. The following values

are available: 5, 10 frames per second. The default value is 5 fps.

Quality: allows you to set the video stream quality. The default value is the [Fixed quality].

 Auto: the camera automatically adjusts image quality and frame rate depending on

bandwidth. If the bandwidth decreases, the camera automatically changes image quality

but keeps the frame rate constant.

 Fixed quality: this option allows you to select any of the following quality levels:

[Excellent], [Detailed], [Good], [Standard], and [Medium].



Fixed bitrate: allows you to set the fixed bitrate. The following values are available: 256,

128, 64, 48, 32, 16 kbps.

NOTE:

See the Appendix A for the detailed information about the [Fixed quality]

6.2.3. MJPEG

IMPORTANT:

If the [RTSP] is enabled, the Motion JPEG parameters are unavailable.

NOTE:

Go to SETTING – Basic – Camera – General to enable the [RTSP].

You can adjust the «MJPEG» parameters only when the [RTSP] is disabled (Pic. 6.19).

N6603 Operations User Manual

Pic. 6.18

Chapter 6. SETTING: Basic

Table of Contents