Select the option for [On] and click OK to enable this function. After you save the changes,
the following settings will be available:
Notify type: select a connection type if you want to be notified when it is changed: [DHCP],
[Static IP], or [PPPoE].
If any of these types is selected, a message containing data from the [Message] field will
be sent to the specified e-mail address.
SMTP server name: type the SMTP server IP address or name (64 characters maximum).
SMTP server port: type the SMTP server port number. The default value is 25.
SSL: check this box if the provider requires SSL communications.
Authentication: select an authentication type to send e-mails.
Off: no authentication is required.
On: authentication is required. You can select [SMTP] or [POP before SMTP].
POP server name: this item is displayed when the [POP before SMTP] option is selected.
The POP server name is used for authorization (64 characters maximum).
User name: type a username to access the mail server (64 characters maximum).
Password: type a password to access the mail server (64 characters maximum).
Recipient e-mail address: type the receiver's e-mail address (64 characters maximum).
You can type up to 3 e-mail addresses separating them by using a semicolon [;].
Administrator e-mail address: type the sender's e-mail address (64 characters
maximum).
Subject: type the e-mail subject (64 characters maximum) into this box.
Message: type the e-mail text in this box (384 characters maximum).
By default, the e-mail contents the following information: the IP address <ip>, the port
<port>, the MAC address <mac>, the camera model <product>, the firmware version <vfirm>, and
the web interface version <vweb>.
6.4. Security
This menu contains the following sections: [Account] and [HTTPS] (Pic. 6.27).
N6603 Operations User Manual
Chapter 6. SETTING: Basic
46