Contex XD2490 Service Manual page 51

System Error:
Description:
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action..
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
Appendix D --- Error codes
100-2017
Firmware download is in progress
100-3000
The firmware was not downloaded properly.
Try the following:
■
Please try to download the firmware again.
100-3001
Unknown firmware error
Try the following:
■ Reboot the system
■ If the problem persist follow the Troubleshooting sequence page 4-2
100-3002
Unable to adjust camera A up. (CIS 1 or 2)
Try the following:
■
Please clean the white background / Pressure rollers and the glass plate.
■
Then calibrate the scanner.
100-3003
Unable to adjust camera B up. (CIS 3 or 4)
Try the following:
■
Please clean the white background / Pressure rollers and the glass plate.
■
Then calibrate the scanner.
100-3004
Unable to adjust camera C up. (CIS 5 or 6)
Try the following:
■
Please clean the white background / Pressure rollers and the glass plate.
■
Then calibrate the scanner.
100-3008
Unable to adjust camera A down (CIS 1 or 2)
Try the following:
■
Please clean the white background / Pressure rollers and the glass plate.
■
Then calibrate the scanner.
D-5