Contex XD2490 Service Manual page 48

System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action:
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
D-2
Appendix D --- Error codes
55-401
Can't find stitchlines.
Try the following:
■
Inspect the sheet for scratches or wear, and replace it if the problem continues.
55-402
Can't find gray area.
Try the following:
■
Please clean scanner.
■
Please run application again.
■
Inspect the sheet for scratches or wear, and replace it if the problem continues.
55-503
Color calibration failed.
Try the following:
■
Please clean scanner.
■
Please run application again.
■
Inspect the sheet for scratches or wear, and replace it if the problem continues.
55-509
IT8 file is not accessible.
Try the following:
■
If you have received a new Calibration Sheet, please allow application to find
reference file over the internet.
■
If problem persists reinstall the software to correct the issue.
55-513
The IT8 reference file could not be found on the internet.
Try the following:
■ Brows to it manually www.contex.com and retrieve the correct IT8 file
or use standard
55-523
Sheet not recognized.
Try the following:
■
Please clean scanner.
■
Please run application again.
■
Inspect the sheet for scratches or wear, and replace it if the problem continues.
55-530
When checking new calibration the result was not within the limits
Try the following:
■
Inspect the sheet for scratches or wear, and replace it if the problem continues.