Contex XD2490 Service Manual page 56

System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action:
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
System Error:
Description:
Corrective Action.
D-10
Appendix D --- Error codes
100-50198
Incorrect camera board.
Try the following:
■
Please check all camera board types..
■
Update the firmware
■
Run SCANtest, test 9 See Appendix A
■
Replace the CIS Element
■
If CIS element 1&2 or 3& or 5&6 is affected replace CIS Unit
■
Run SCANtest, test 9 See Appendix A
■
Replace the Scanner Controller SUI
100-50199
Incorrect Main Electronics Board and combination Camera Board.
Try the following:
■
Please validate the combination for this scanner.
■
Check that all the cables are connected correctly to the Cameras Boards.
■
Update the firmware
■
Run SCANtest, test 9 See Appendix A
■
Replace the CIS Unit
■
Run SCANtest, test 9 See Appendix A
■
Replace the Scanner Controller SUI.
100-50231
Firmware download is in progress
Try the following:
100-50232
Firmware is incomplete.
Try the following:
■
Please download new firmware
100-50234
Scanner is in safe mode.
Try the following:
■
Reboot the system
100-50235
Scan subsystem failed to initialize (FW/SW mismatch)
Try the following:
■
Reload system