Konica Minolta bizhub pro 920 Copier Manual page 150

8
• Image Repeat
Selects the horizontal image area across the page, and repeats it down the
page as many times as the repeat width setting (10 ~ 150 mm) permits in
manual or auto.
• Booklet Pagination
Creates a multiple page signature booklet copied on both sides of paper in
1-2 or 2-2 copy mode.
• Neg-/Positive Reverse
Reverses the image from black-on-white to white-on-black or vice versa.
• Page Margin
Creates or removes a binding margin at the top, bottom, right and left edges
(shift amount from 0 ~ 250 mm, in 1 mm increments); reduces image to pre-
vent image loss (reduce & shift amount from 0 ~ 250 mm, in 1 mm incre-
ments).
• Frame/Center Erase
Erases border and/or center image area using Frame (1 - 300 mm), Center (1
- 99 mm), or Frame & Center.
• Non-Image Area Erase
When copying from the original glass when the document cover is open,
copies only the image area and not the exposed area of glass, which would
otherwise copy as black.
• Image Centering
The original image on the original glass or in the document feeder is copied
and centered on a sheet.
• Full Scan
Makes copies printed completely to the edges of the paper to avoid image
loss.
• No Rotate
Deactivates the Rotation function that automatically rotates the image before
copying when the portrait/landscape orientation of the original is different
from the orientation of the copy paper.
• Stamp
Prints watermark, regular stamp, date/time, page number, and numbering
onto the output copies to enhance the presentation and usefulness of the
copies.
• Annotation
Allows you to register words, current date/time, and annotation number as a
set and to print it onto output copies at the location designated on the
screen.
8-4
Before Making Copies
bizhub PRO 920