Konica Minolta bizhub pro 920 Copier Manual page 117

Troubleshooting
2
Follow the procedure on the screen to remove misfed paper.
– Touch the arrow key to go to the next page of a series of illustra-
tions, if provided.
– Touch [JAM Position] to return to the Jam Position Screen.
3
When completed, the Machine Status Screen will be restored.
– If any misfeed location is left, the Jam Position Screen will be re-
stored with the next disposal procedure in the message area and
the location number in the jam position display. Repeat steps 1 to
2 until all the locations are cleared.
Reminder
When removing mishandled paper, be sure to leave no torn paper inside
the machine.
Do not touch or damage the drum surface.
7 CAUTION
The internal fixing unit is very hot.
% To avoid getting burned, DO NOT TOUCH.
Be especially careful not to put your hand into the fixing unit area when
withdrawing the fixing conveyance unit to remove mishandled paper.
7 CAUTION
When removing stuck staples
% Be careful of removing staples stuck inside the machine so as not to
get injured.
bizhub PRO 920
5
5-5