Konica Minolta bizhub pro 920 Copier Manual page 388

14
? Do you want to correct the job settings?
% Touch [Cancel] on the Check Screen to return to the Basic Screen.
Make setting change, then restart the operation from step 2.
6
Select the desired job key.
– The job keys numbered from 01 to 10 are displayed on the screen.
– Touching [Next] will display the keys from 11 to 20, and 21 to 30.
Touch [Next] or [Back] to display the desired key.
– A blank keys without name or lock icon (
stored under that key, and a named job without a lock icon (
played can be overwritten.
– The key with a lock icon (
lected.
Touch [OK] to proceed to the Name Input Screen.
7
Enter a job name.
– Enter a job name in up to 16 characters, using the touch panel key-
pad.
– Use right and left arrow keys to move the cursor, and use [Shift] to
enter upper case letters or symbols.
14-12
Advanced Information
) indicate that no job is
) displayed is locked and cannot be se-
) dis-
bizhub PRO 920