Error Detection - Ricoh B230 Service Manual

2.2.6 ERROR DETECTION

Jogger motor error
Jogger motor home position
detection error
Stapler error
Output tray upper limit error
Output tray motor error
Stack height detection error
The above errors are indicated as "Finisher jam" at the first occurrence.
If the same error happens again in the next job, "finisher error" is indicated.
SM
Conditions
The jogger home position sensor does not shut off after
the jogger motor starts.
The jogger home position sensor does not turn on after
paper shifting.
The stapler home position sensor (inside the stapler unit)
does not turn on after stapling.
The tray upper limit sensor is activated.
The output tray is away from the target position for more
than 10 seconds.
The stack height detection lever does not return to its
home position before going to detect the stack height.
21
Detailed Section Descriptions
B792