Stacking For Booklet Stapling; X 14 (Legal) Or Shorter - Ricoh B230 Service Manual

Hide thumbs Also See for B230:

Table of Contents

STACKING FOR BOOKLET STAPLING

2.9.1 OVERVIEW

There are two stoppers near the stapler unit. These stoppers hold the stack of paper in the

correct position during stacking.

The stoppers are called 'stopper S' and 'stopper L'. Stopper S is used for legal size paper,

or shorter than 8.5 x 14 inches. Stopper L is used for paper that is longer than 8.5 x 14

In corner stapling mode, the pawl on the stack feed-out belt holds the stack of

paper. For booklet stapling, this pawl stays at home position, which is on the rear

side, so it does not interfere with booklet stapling.

At the start of the set, the upper retraction motor [A] turns on, and stopper S [B] moves

down into position to catch the paper

clamp roller [C] into contact with the stack

Stacking for Booklet Stapling

. The upper retraction motor also moves the upper

Table of Contents