Jogger Unit - Ricoh B230 Service Manual

Hide thumbs Also See for B230:

Table of Contents

JOGGER UNIT

The jogger is used in corner-staple mode and in booklet mode.

For each sheet of paper when it arrives in the staple tray, the following is done.

The jogger motor [A] drives the jogger fences [B].

The positioning roller solenoid moves the positioning roller [C] onto the top of the sheet.

Then the lower transport motor turns on and the positioning roller rotates to push the

sheet of paper against the stopper (there are two stoppers: stopper L or stopper S the

one that is used depends on the paper size, as we shall see later.)

The jogger HP sensor [D] detects when the jogger fences are at home position (away from

The staple tray exit sensor [E] detects if a jam occurs when the machine feeds the stack out

at the bottom of the jogger tray.

Table of Contents